Tel: + 86 (0)755 8358 0322
Home > News > Content
Categories

Thank you for your interest in Protex.
You can reach us at our postal addresses :
Protexoffice for China
Protex China
Address: Room 701, Block C, NanFang Building, No.122 Luo Fang Road, LuoHu District, Shenzhen, 518003 China
Tel: + 86 (0)755 8358 0322
Fax: + 86 (0)755 8358 1966
E-mail:inquiry@protex-tech.com


Barcode Printer Ribbon Of Clean

Protex Smart Technologies Co.,Ltd | Updated: May 24, 2017

Barcode Printer Ribbon Print head cleaning: To regularly clean the printhead, cleaning tools can be cotton swabs and alcohol. Turn off the power of the barcode printer, please keep the same direction when wiping (avoid dirt residue when wiping back and forth), turn the printhead upside down, remove the Ribbon, label paper, and use a swab (or cotton cloth) with a printhead cleaning solution to wipe the printhead until it is clean. Then gently dry the printhead with a clean cotton swab. Keep the print head clean to get a good print effect, Barcode Printer Ribbon the most important thing is to extend the life of the printhead.


To regularly clean bar code printer glue stick with cotton swab and alcohol, keep the stick clean, but also to get a good print effect, and extend the print head life. Barcode Printer Ribbon In the printing process, the label paper will be a small amount of powder on the stick, if not timely cleaning, will hurt Barcode Printer Ribbon and print head;

Because the general label paper for Self-adhesive, its glue easy to stick in the transmission shaft and channel, plus dust, directly affect the printing effect, it needs to be cleaned. The method is to use the dipped cotton swab (or cotton cloth) to scrub the transmission shaft, the surface of the passage and the dust in the chassis, clean, dry.

To keep the sensor clean, no paper error or ribbon error occurs. The sensor includes a ribbon sensor and a label sensor, and its position is shown in the manual, Barcode Printer Ribbon using a dipped swab to scrub the sensor head clean and dry.

Daily maintenance of Barcode printers:

Every time you print a roll of ribbon, you should clean the barcode print head. This can maintain print quality, reduce the number of barcode printer maintenance, prolong the service life of barcode printing head.

(1) Barcode Printing Head Cleaning

Turn off the bar code printer power, Barcode Printer Ribbon the bar code printing Head, remove the Ribbon, label paper, dip a little bar code printing Head Cleaning Liquid cotton swab (or cotton), light bar code printing head until clean. Then gently dry the barcode print head with a clean cotton swab.

(2) The cleaning of the rollers

After cleaning the barcode print head, rinse the drum with a small swab (or cotton) dipped with 75% alcohol. The method is to rotate the drum with the hand, scrub while cleaning and dry. The two steps above the cleaning interval is generally three days one times, if the barcode printer is Barcode Printer Ribbon used frequently, preferably one days one times.

(3) Cleaning of transmission system and cleaning in the chassis

Because the general label paper for Self-adhesive, its glue easy to stick in the transmission shaft and channel, plus dust, directly affect the printing effect, it needs to be cleaned. Generally one weeks one times, the method is to dip the alcohol swab (or cotton) to scrub the transmission of the various shafts, the surface of the channel and the dust in the chassis, clean, dry.

(4) Sensor cleaning

Sensors include color band sensors and label sensors, the location of the instructions, generally one months to three months cleaning once, the method is to use the blower device (suction ball can) to blow the dust on the sensor.