Tel: + 86 (0)755 8358 0322
Categories

Thank you for your interest in Protex.
You can reach us at our postal addresses :
Protexoffice for China
Protex China
Address: Room 701, Block C, NanFang Building, No.122 Luo Fang Road, LuoHu District, Shenzhen, 518003 China
Tel: + 86 (0)755 8358 0322
Fax: + 86 (0)755 8358 1966
E-mail:inquiry@protex-tech.com


Thermal Transfer Ribbon Red Ribbon

It is Red wax resin ribbon for various labeling application on all flat-head printers, like, Valentin, Datamax, Eltron, CAB, Toshiba, Intermec, Sato, Zebra, Argox, Godex, TSC, Citizen etc. PERFORMANCE PROPERTIES •Good label versatility for labels printing •Higher heat resistance up to 120°C...

Detailed description

It is Red wax resin ribbon for various labeling application on all flat-head printers, like, Valentin, Datamax, Eltron, CAB, Toshiba, Intermec, Sato, Zebra, Argox, Godex, TSC, Citizen etc.


PERFORMANCE PROPERTIES

•Good label versatility for labels printing
•Higher heat resistance up to 120°C
•Superior smear resistance
•Low Static electricity & ink flaking problems


TYPICAL APPLICATION

•Logistics, Shipping, Flexible Package & Parcel labels
•Product ID and Retail tags
•Inventory, Storage & Number plates
•Direct Food Contact
•Health Care
•Multipurpose Labels


RECOMMENDED LABEL STOCK

•Uncoated and Gloss & matt Coated papers
•Polyethylene, polypropylene, polyvinylchloride
•Plastic


RIBBON SPECIFICATION

•Anti-smear Wax resin ribbon, used for flat head printer
•Base Film Thickness: 4.5 ± 0.4µ
•Ink Thickness: 3.0 ± 0.2µ
•Total Thickness:  < 9.0µ
•Ink Color: Red, Green, Blue
•Transmission density:  1.0 Mini
•Tearing resistance:  >200N/mm²
•Friction coefficient:<0.035


STORAGE CONDITIONS

•0°C TO 40°C
•Humidity: 30 to 85 % RH


PRING PROPERTY

 PaperCoated PaperPETPPPEPVC
CompatibilityPPPPPP
Image Density

1.56

2.03

1.97

1.82

2.15

2.00


Note:

1)Smoothness Bekk for paper family must be over 200s

2)Maximum printing speed: 10IPS

3)Image Resolution for Paper & Film:

Minimum Size:- For the line: 0.1mm

- For the characters: 1.0mm


DURABILITY OF PRINTED IMAGE

Smear + heat (50°C):  ANSI > B
Test Condition: Smear with cardboard (weight 1kg – 50 back and forwards)
Heat (120°C):  No ink on the cotton fabric
Test condition: Heat gradient 3,6kgF/cm²
Scratch:  ANSI > B
Test Condition: 50 back and forwards with a rub tester
Light:  ANSI A
Test Condition: Xenon lamp at 650W/m²
Water: ANSI A
Test Condition: 24 hours in water


DURABILITY OF PRINTED IMAGE

Note: 5 refers to good with no damage, 0 refers to bad.

Related Products
Feedback